A simple aluminium channel ladder rack with plastic loading skids and wear blocks. Simply lean your ladders against the skids at the rear of the vehicle, then lift and slide into position. Your ladders can then be secured with our ladder clamps (below) or any suitable tie-downs. Please note that the 3,2m version incurs a carriage surcharge, hence the higher price.

PLEASE NOTE - LOCAL DELIVERY (15 MILE RADIUS OF BB5 5YB)  OR COLLECTION ONLY  . PLEASE CONSIDER OUR SELF-BUILD ROOF TUBE KITS (below). ONLY SELF-BUILD KITS AVAILABLE OUTSIDE THE UK.

THESE ITEMS CANNOT BE SHIPPED OUTSIDE THE UK

A pair of sturdy ladder clamps to secure your ladders to our roof bars. Fabricated from mild steel and electro-plated to withstand corrosion. Facility to fit two long-shank padlocks to each clamp (not provided). For use with extension ladders or larger sets of step ladders. May not be suitable for single extension or roof ("cat") ladders.

 These are the only ladder clamp bars that we know will work properly with our bars, due to the width of the aero profile.

A pair of sturdy fabricated steel load stops. Can be mounted as adjustable or fixed, simply by swapping the supplied hand-wheel fasteners for socket-head cap screws (also supplied). Compatible with all KRS roof bars.

A sturdy 6mm steel lashing ring. Simply fastens into the top channel of the roof bars and provides a safe and convenient anchor point for webbing, bungee cords or ratchet straps. Powder coated with stainless steel fasteners. Compatible with all KRS roof bars.

PLEASE NOTE - LOCAL DELIVERY (15 MILE RADIUS OF BB5 5YB)  OR COLLECTION ONLY  . PLEASE CONSIDER OUR SELF-BUILD ROOF TUBE KITS (below). ONLY SELF-BUILD KITS AVAILABLE OUTSIDE THE UK.

The Bazooka Roof Tube is a simple yet tough and elegant solution to the transport and secure storage of long section materials, such as copper pipe, conduit, extruded profiles etc.

Because Bazooka roof tubes are constructed from high-grade PVC tubing there is no risk of galvanic corrosion when storing/transporting metal conduit or pipe - most other roof tubes are aluminium and their structural integrity can be compromised over time if storing/transporting copper or steel items. Both end caps are lockable.

Available in 2,0m, 2,5m or 3,0m length. Padlocks are not included.

Available in two sizes (4" and 6"), each Bazooka kit contains the necessary hardware for you to construct your own roof tube to suit the length of materials that you carry regularly.

Each kit comprises -

• 2 x Bazooka roof tube end caps
• 2 x Bazooka roof tube pipe clamps

The pipe clamps are compatible with our own KRS roof rails as well as those from Thule.

All you need to provide is a length of standard 110mm or 160mm PVC soil pipe (available from plumber's and builder's merchants), two padlocks for the endcaps and some solvent-based PVC cement such as "FloPlast" to glue the caps to the tube. Total assembly and fitting time is around 1 hour, although we recommend allowing the glue to cure for around 24 hours before use.

A sturdy PVC loading roller and bracket to make getting your ladder, surfboard or other items on the roof just that little bit easier. Roller is 600mm long x 40mm diameter. Easily mounted to our roof bars using three screws and a single allen key.

The Extended version mounts the roller approximately 250mm away from the roof bar to which it is attached.

The Extra Extended version adds an additional 130mm on to this - this makes it more suitable for vehicles such as Vivaro or Trafic vans where the rearmost roof bar is significantly forward of the rear door/tailgate.

NOTE - loading rollers are not suitable for use with "tailgate" rear openings due to clearance/fouling issues. Rollers CANNOT be used in conjuction with our existing ladders rails.

Tough nylon webbing ladder retaining straps with metal cam-lock buckle. Simply clips into the top channel of the roof bar. We recommend fitting these in pairs, one on each front and rear roof bar. Heavy Duty version is 50mm wide x 750mm long, secured using a double screw and reinforcing plate. 

Two 1,1m lengths of J-type awning rail, designed to clamp under our Minirack leg adaptor brackets, or your roof rails. This rail allows you to attach an awning or sun canopy fitted with "Kador" type piping using a figure-8 plastic adaptor (available from most caravan or motorhome dealers). Powder coated mild steel.

Note - some cutting to length may be required. We can do this for you if required. Not suitable for pre-2014 Vivaro/Trafic/Primastar, or vehicles with a heavily-curved roof.